Putting Glass Walls on New York's Slaughterhouses So We Can
See Behind Closed Doors
Address: 922 Country Rt 53, Brasher Falls, NY, 13613
Establishment No.: m4499
USDA Inspection Report: 2 Jun 2011
Violation: 417.2(a)(2), 417.5(a)(1), 417.5(a)(2), 417.5(a)(3), 417.5(b)
Citation: During a Food Safety Assessment (FSA) the following noncompliances were noted by EIAO [redacted] 1) The establishment did not reassess this HACCP plan for the 2010 calendar year. This is a noncompliance with 9 CFR 417.4 (a) 3, which requires that "every establishment shall reassess annually and whenever any changes occur that could affect the hazard analysis or alter the HACCP plan." 2) For CCPB1 cold storage: The establishment does not list the thermometer calibration procedure in the HACCP plan. This is a noncompliance with 9 CFR 417.2 (c) (7). 3) The stem thermometer calibration procedure on file does not support the frequency of "[redacted] in the HACCP plan for process-monitoring calibration activities, as it does not specify a frequency of calibration. This is a noncompliance with 9 CFR 417.5 (a) 2. 4) The establishment is not [redacted] as described in the HACCP plan for CCP B-1. This is a noncompliance with 9 CFR 417.4 (a) 2( iii ). 5) The establishment has not recorded the results of the verification activities for CCP-B1; this is a noncompliance with 9 CFR 417.5 (a) 3. 6) The establishment is not conducting or recording direct observation at the time the event occurs as the times recorded are after the official inspection hours. This is a noncompliance with 9 CFR 417.5 (b). 7) The establishment does not list specific procedures for direct observation in the HACCP plans. This is a noncompliance with 9 CFR 417.2 (c) (7). 8) The establishment has not provided documentation that demonstrates that verification activities have been performed for CCP-B10 and CCP-B11 as required by the HACCP regulations. The establishment is not in compliance with 9 CFR 417.4 (a) 2 (ii) and 417.5 (a) 3.
417.2(a)(2) A flow chart describing the steps of each process and product flow in the establishment shall be prepared, and the intended use or consumers of the finished product shall be identified.
417.5(a)(1) The written hazard analysis prescribed in §417.2(a) of this part, including all supporting documentation;
417.5(a)(2) The written HACCP plan, including decisionmaking documents associated with the selection and development of CCP’s and critical limits, and documents supporting both the monitoring and verification procedures selected and the frequency of those procedures.
417.5(a)(3) Records documenting the monitoring of CCP’s and their critical limits, including the recording of actual times, temperatures, or other quantifiable values, as prescribed in the establishment’s HACCP plan; the calibration of process-monitoring instruments; corrective actions, including all actions taken in response to a deviation; verification procedures and results; product code(s), product name or identity, or slaughter production lot. Each of these records shall include the date the record was made.
417.5(b) Each entry on a record maintained under the HACCP plan shall be made at the time the specific event occurs and include the date and time recorded, and shall be signed or initialed by the establishment employee making the entry.