Putting Glass Walls on Pennsylvania Slaughterhouses So We Can See Behind Closed Doors
Smucker's Meats

Address: 735 Pinkerton Rd, Mount Joy, PA 17552
Establishment No.: m21265

USDA Inspection Report: 29 Jul 2010

Code: 06D01
Violation: 416.2(b)(2)

Citation: While performing procedure 01B02, the following facilities non-compliance was observed in carcass cooler #1 this morning at 6:00 am: The interior of the carcass entrance door, and the wall on the right, adjacent to the cooler entrance has some ufm residues extending from the floor up approximately 12 inches. There is an opening in the floor, where a drain had been previously but has been sealed, creating an area about 3 inches across and several inches deep where blood, etc. can accumulate but not drain away. The wall area at the exit doors exhibits some flaking paint about 12-18 inches above the floor, affecting an area about 24 inches long. The area was shown to and discussed with this morning. The requirements of part 416.2(b)(2) of 9 CFR were not met.

Regulation:

416.2(b)(2) Walls, floors, and ceilings within establishments must be built of durable materials impervious to moisture and be cleaned and sanitized as necessary to prevent adulteration of product or the creation of insanitary conditions.

 

Next Report: USDA Inspection Report: 15 Sep 2010
Previous Report: USDA Inspection Report: 24 Jun 2010

Return to: Smucker’s Meats
Return to: Pennsylvania Slaughterhouses
Return to: Slaughterhouses