Putting Glass Walls on Pennsylvania Slaughterhouses So We Can
See Behind Closed Doors
Jaindl Turkey Sales Inc.
Address: 3150 Coffeetown Rd, Orefield, PA 18069
Establishment No.: p460
USDA Inspection Report: 29 Sep 2011
Violation: 381.65(e), 417.2(c)(4)
Citation: On this day at 0756hrs, Inspection performed an 03J01 verification procedure concerning CCP1B--visible examination of turkey carcasses before trussing/zero visible fecal. Bird #3 of 10 was observed by the IIC and SPHV to have fecal material between the right outside portion of the breast and the skin and connective tissue near the thigh. Fecal was yellow and paste like, approximately 1/4 inch in size, and had no visible plant material contained within it. Immediate regulatory control action was initiated with stoppage of the chill line, after which the deviation was shown to who moved the bird to establishment reprocessing station. Plant management was advised to begin corrective actions concerning the deviation from the critical limit. Observation by Inspection represents a violation of 9 CFR 417.2(c)(4) states "List the procedures, and the frequency with which those procedures will be performed, that will be used to monitor each of the critical control points to ensure compliance with the critical limits;", and 9 CFR 381.65 which states "Operations and procedures, generally. (e) Poultry carcasses contaminated with visible fecal material shall be prevented from entering the chilling tank." was informed of this non-compliance with regulations verbally and was informed in writing with the issuance of this Non-compliance Report. Past Similar NRs - Previous Ineffective Plant Actions: establishment has not yet responded to previous non-compliance reports NR: 18-2011 dated 9/23/2011; NR: 15-2011 dated 9/19/2011
381.65(e) Poultry carcasses contaminated with visible fecal material shall be prevented from entering the chilling tank.
417.2(c)(4) List the procedures, and the frequency with which those procedures will be performed, that will be used to monitor each of the critical control points to ensure compliance with the critical limits;