Putting Glass Walls on Pennsylvania Slaughterhouses So We Can See Behind Closed Doors
Hain Pure Protein Corporation

Address: 220 N.Center St, Fredricksburg, PA 17026
Establishment No.: p533

USDA Inspection Report: 29 Mar 2011

Code: 01B02
Violation: 416.13(c), 416.4(a), 416.4(b)

Citation: At approximately 0530 hrs., after the plants pre-operational sanitation and prior to the start of operations, I observed the following noncompliance's while performing the 01B02 procedure for pre-operational sanitation. In the evisceration department I observed product residue build up and fat on the inside of the drawing machine on the center shaft. And at the house inspection station I observed product residue build up on the inside of the lung guns. I immediately notified of the noncompliance's and both units were cleaned in my presence. After a review of the SSOP records for the evisceration department, the lung guns were documented as "rejected for #4 grease and were cleaned and sanitized and the department was released at 0445 hrs. for USDA inspection. This document serves as a written notification that failure to comply with regulatory requirements could result in additional enforcement action described in 9 CFR part 500.

Regulation:

416.13(c) Each official establishment shall monitor daily the implementation of the procedures in the Sanitation SOP’s.

416.4(a) All food-contact surfaces, including food-contact surfaces of utensils and equipment, must be cleaned and sanitized as frequently as necessary to prevent the creation of insanitary conditions and the adulteration of product.

416.4(b) Non-food-contact surfaces of facilities, equipment, and utensils used in the operation of the establishment must be cleaned and sanitized as frequently as necessary to prevent the creation of insanitary conditions and the adulteration of product.

 

Next Report: USDA Inspection Report: 6 Apr 2011
Previous Report: USDA Inspection Report: 23 Mar 2011

Return to: Hain Pure Protein Corporation
Return to: Pennsylvania Slaughterhouses